Print

Philips and DSM announce breakthrough sustainable solution for heat management

New DSM Stanyl thermally conductive materials replace aluminum housing in Philips Master LED MR16 retrofit lamp.

Philips, the world’s leading producer of energy-efficient lighting solutions, has introduced a new LED lamp with a difference. Based on a joint development with DSM, the Philips Master LED MR16 retrofit lamp is the first high-power LED application in which the aluminum cover is replaced with a thermally conductive plastic – Stanyl – to control the heat. Stanyl also offers the additional benefits of flexibility in design, exceptional durability and weight reduction. Going forward, this sustainable solution may be applied across Philips’ LED retrofit lamp range.

The Philips Master LED MR16 is a 4W LED replacement for the popular low-voltage halogen spot lamp. With light output equivalent to that of 20W Halogen MR16 lamps, it offers the key benefits of up to 80% energy saving and a 40-times longer lifetime. Master LED MR 16 employs three Philips Lumileds Luxeon Rebel LEDs and is available in both 2700K (true warm white) and 3000K (warm white) colors. Its target markets are the professional (hospitality) segments in Europe, Asia and North America.

Philips wanted to create a new product that would stand out in the marketplace. To this end, it was looking for a material that would deliver superior heat management while at the same time offering greater design flexibility and the same or improved product performance.

Guido van Tartwijk, Global Marketing Director, LED Retrofit Lamps for Philips, says: - DSM Engineering Plastics provided all the necessary support by making a product with the required thermal conductivity to successfully dissipate the heat generated by the LED. Because DSM and Philips share a vision of sustainability, we are able to ensure that the new material provides a green solution – helping us to create lightweight, highly efficient LED lamps that reduce electricity consumption and offer extended lifecycles.

Roelof Westerbeek, President DSM Engineering Plastics: - We have been involved in the development of this new application from an early stage. We were able to prove that for applications such as these, thermally conductive Stanyl is better than aluminum if applied in the right conditions and design. In addition, you gain the benefits of thermoplastics, such as greater design freedom, outstanding durability and weight reduction.

Royal Philips Electronics of the Netherlands is a diversified Health and Well-being company, focused on improving people’s lives through timely innovations. As a world leader in healthcare, lifestyle and lighting, Philips integrates technologies and design into people-centric solutions, based on fundamental customer insights and the brand promise of “sense and simplicity”. Headquartered in the Netherlands, Philips employs approximately 116,000 employees in more than 60 countries worldwide. With sales of EUR 26 billion in 2008, the company is a market leader in cardiac care, acute care and home healthcare, energy efficient lighting solutions and new lighting applications, as well as lifestyle products for personal well-being and pleasure with strong leadership positions in flat TV, male shaving and grooming, portable entertainment and oral healthcare.

DSM Engineering Plastics is one of the world's leading suppliers of engineering thermoplastics, with a permanent focus on innovation. Most recently, DSM Engineering Plastics introduced the first new polymer of the 21st century: Stanyl ForTii.

DSM Engineering Plastics delivers Living Solutions: materials that support a durable vision of people, planet and profit for customers who design or produce electrical applications, electronic equipment, cars, barrier packaging films as well as many mechanical and extrusion applications. DSM Engineering Plastics offers a broad portfolio of high performance materials, including Akulon 6 and 66 polyamides, Arnitel TPC, Arnite PBT and PET polyesters, Xantar polycarbonate, Yparex extrudable adhesive resins and Stanyl global market leader in high heat polyamides.

DSM Engineering Plastics is part of the performance materials cluster of DSM, with sales in 2008 of EUR 761 million and 1500 employees worldwide.



shCqoONW shCqoONW

sent: 2012-03-13 08:50:20

Philips is the living proof of a caopmny that thinks that if you adorn yourself with a smart marketing phrase that it will change your business. The caopmny has never understood how to win the hearts and minds of the consumer. They need to find an advertising property that can help them to become more human. When I look at this ad, I still see a tech driven caopmny that doesn't know how to make their products sexy. And indeed, Wouter, a LED light that blinds you, is not a sexy product not even if designed by Philippe Starck.