Nova D Commerce Ltd.
Glass fiber reinforced polyamide, PA6-GF30, injection molding, engineering plastics, industrial applications, technical compounds
Activity description
NOVA D COMMERCE Ltd. is a Bulgarian supplier of engineering plastics, focused on high-performance polyamide compounds. Our key product, PA6-GF30 (P1288), is a glass fiber reinforced polyamide 6 for demanding injection molding.
It offers excellent strength, heat resistance, and dimensional stability—ideal for automotive, electrical, and industrial components. We support clients across Europe with datasheets, guidance, and reliable delivery.
PA6 GF30 – Technical Specification
Property
Value
Unit
Test Standard
| Tensile Strength (1A; 50mm/min) | 176 | MPa | ISO 527 |
| Tensile Modulus (1A; 50mm/min) | 1373 | MPa | ISO 527 |
| Elongation at Break (1A; 50mm/min) | 12.6 | % | ISO 527 |
| Flexural Modulus (10mm/min) | 7462 | MPa | ISO 178 |
| Flexural Strength (10mm/min) | 261 | MPa | ISO 178 |
| Izod Impact (Notched, 23°C) | 16.5 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, -30°C) | 11.2 | kJ/m² | ISO 180/1U |
Thermal Properties
Value
Unit
Test Standard
| Melt Mass-Flow Rate (275°C/5kg) | 51.06 | g/10min | ISO 1133 |
| HDT @ 1.80 MPa | 198.4 | °C | ISO 75-1/-2 |
| HDT @ 0.45 MPa | 216.8 | °C | ISO 75-1/-2 |
Other Properties
Value
Unit
Test Standard
| Water Absorption (24h, boil) | - | % | Sim. to ISO 62 |
| Density | 1.36 | g/cm³ | ISO 1183-1 |
| Ash Content | 32 | % | ISO 3451-1 |
Injection Molding Guide
Recommended Values
| Pre-Drying Temp | 80–100°C (4–8 hours, ≤ 0.2% moisture) |
| Melt Temp | 250–275°C |
| Mold Temp | 80–120°C |
| Barrel Zone Temp (Rear) | 250–275°C |
| Barrel Zone Temp (Center) | 260–280°C |
| Barrel Zone Temp (Front) | 265–285°C |
| Injection Pressure | 70–130 MPa |
| Dwell Pressure | 40–90 MPa |
| Back Pressure | 7–15 MPa |