Mills Crusher Lines TO Crumble Wood Cable Plastics (108977)

Type of offer::
Selling
Price:
not specified
Condition:
New
Year:
2019
Total power installed [kW]:
30
Output [kg/h]:
1500
Valid for:
The offer has expired

User:
GRABTRADE
Company:
GrabTrade Adam Grabowski
Name and surname:
Adam Grabowski
Contact:


LINES CRISISING, CRUSHING.

We provide comprehensive solutions tailored to customer requirements in terms of:

  • type of ground material (type and size of material, wood, cable waste, paper, cardboard,
  • the desired performance of the entire set while maintaining the required final fraction
  • type and number of machines used in the line (type of pre-shredder, belt conveyor with or without the possibility of metal separation, knife mill, big-bag station)
  • in our set we can also include washing devices
  • we will adjust the distribution of the whole chain to the customer's surface

In the attached photo, the crushing line delivered to our customer prepared for grinding mainly PE pipes and zlepów. Adopted capacity min. 500kg / h

The composition of the set:

  • as a pre-shredder, a single-shaft crusher with a movable charging hopper typical for pipes (a safe solution for grinding pipes vertically), a 37kw main motor, a 800mm long rotor
  • conveyor receiving from the crusher and feeding the material to the knife mill (in this case without metal separation, we can deliver with a magnetic drum, metal detector, magnet over the belt)
  • knife mill with rotor 800mm, diameter 420mm with main motor 37kw. A device with an additional side inlet allowing grinding of smaller diameter pipes without the use of a pre-crusher
  • packing station (big-bag station). Transport fan, cyclone construction for hanging big-bag sacks.
  • central control with a system that protects the set from overload

UNIVERSAL CRUSHERS WITH HYDRAULIC PRESSURE

  • rotor length from 600mm to 4000mm
  • engine powermain from 18.5kw to 2 x 160kw
  • several types of grinding rotors (universal, foil, very hard)
  • several variants of hydraulic pressure (horizontal, additional vertical and so-called "banana" arcuate pressure axis)

CUTTING MILLS

  • the length of the grinding rotor from 600mm to 2400mm
  • power of main engines from 15kw to 250kw
  • several variants of the rotor (V 3 or 5 rows, cascade-cutter, vane)


CUTTING MILLS PC SERIES

  1. Model PC2660 15 / 18,5kw cascade or "V" arrangement, rotor length 600mm, diameter 260mm
  2. Model PC3280 22 / 30kw cascade or "V" arrangement, rotor length 800mm, diameter 320mm
  3. Model PC4280 37kw cascade or "V" arrangement, rotor length 800mm, diameter 420mm
  4. Model PC42100 45 / 55kw cascade or "V" arrangement, rotor length 100mm, diameter 420mm
  5. Model PC42120 55kw cascade or "V" arrangement, rotor length 1200mm, diameter 420mm
  6. Model PC52120 75kw cascade or "V" arrangement, rotor length 1200mm, diameter 520mm

Single-shaft crushers with hydraulic pressure

  1. Model WT2260 main engine 18.5kw, rotor length 600mm, diameter 220mm
  2. Model WT3080 main engine 30kw, rotor length 800mm, diameter 300mm
  3. Model WT40800 main motor 37kw, rotor length 800mm, diameter 400mm
  4. Model WT40100 main engine 45kw, rotor length 1000mm, diameter 400mm
  5. Model WT40120 main motor 55kw, rotor length 1200mm, diameter 400mm
  6. Model WT40150 main engine 75kw, rotor length 1500mm, diameter 400mm

FINANCING:

Thanks to cooperation with leasing companies, we are able to help you in obtaining a favorable financing for the purchase of the equipment we offer in a very short time. Decision in one day

BUY USED MACHINES:

We will buy your shredder or accept it in settlement




Plastech is not responsible for the content of offers. The only owner of it is the user that published it at Plastech..