Vertical Baler Hsm V-Press 605

HSM V-Press 605 - an ideal proposition for retail stores , in an economical way reduces the volume of packaging waste like cardboard or foil.

- Low spatial requirement
- Special claws supporting the material, affecting the optimization of the density of the crushed material and increasing the loading volume, and thus increasing the baling performance
- Simple and quick press assembly
- Mechanical bale ejector
- The door opens to the side, closed with a manual closing wheel
- Two power versions !!!

Technical parameters:
- Pressing power in kN: 57
- Engine in kW: 1.5
- Voltage / frequency: 1 x 230 V / 50 Hz ; 3 x 400 V / 50 Hz
- Loading hole, width x height in mm: 800 x 495
- Weight of the bale in kg (depending on the material): up to 70 kg
- Dimensions of the bale length x width x height in mm: 800 x 600 x max. 600
- Unloaded cycle time (theory) in S: 21
- Dimensions of the crushing chamber, width x depth x height in mm: 800 x 600 x 1045
- Dimensions of the device width x depth x height in mm: 1190 x 815 x 1980
- Weight of the device in kg: 485
- Binding: 3-fold polyester tape