Akpol Adam Kuś
The AKPOL Adam Kuś company was founded in 2005. From the beginning, AKPOL has been dealing in the recycling of plastics - production of HDPE, LDPE and PP regranulate.
Poland
Belt feeder
Motor power: 1.5KW 400V
Gearmotor TYPE: NMRV075F1 i20
Belt width: 600mm
Belt Length: 6000mm
<= "" p = "">
2.2KW 400V electric motor
Gearmotor TYPE: PMRV
Level sensors
Dye dispenser
KL-160 extruder
Reduction gear
TYPE: ZLY375EH12.5-23M4-19010264
Gear ratio 12.5
Producer GUOMAD
L / D = 5.59m / 160
Screw diameter: about 160 mm, Material: 38CrMoAlA.
Nitrided screw and cylinder - air-cooled.
Double degassing
Motor power: 250 kW, rpm controlled by an inverter MFC710
Electronic parts: TWERD inverter MFC710, OMRON, Schneider contactors
Zone heating system, power 85 kW, cooling section, power of each fan 0.37KW x 8 pcs.
Screen exchanger: hydraulic plate, 254 mm
pressure signaling system on the sieve exchanger with a Pumpkin Co sensor
Productivity: 800 kg / h
Vacuum pump, motor power 7.5 kW.
Filter surface diameter: 305 mm
Maximum pressure: ≤20Mpa
screen change time≤2 seconds
Material: 38CrMoAl
Fog cutting at the head
Motor power: 1.5kW 2900rpm controlled by an inverter
The heating power of the head is 3 kW
Number of knives: 3-6 pieces made of W18Cr4V material
Water pump power: 3 kW
40Cr head material
Main components made of stainless steel
Vertical centrifuge with tub
Turbine subassembly with steam extraction
Engine power: 5.5 kW 1480 rpm
Producer WUHE
Main components made of stainless steel
Water outlet at the bottom of the tank
2.2 kW water pump motor power
The AKPOL Adam Kuś company was founded in 2005. From the beginning, AKPOL has been dealing in the recycling of plastics - production of HDPE, LDPE and PP regranulate.
Poland