Angle welder model FP6000 and shrink tunnel model T450

Welder:
1. Automatic welding system
2. PTFE coated sealing bar.
3. 16 bit microprocessor for machine control and operation.
4. Possibility to remember 10 different work cycles.
5. Safety button.
6. Multilingual LCD control panel, backlit.
7. Microprocessor-controlled welding temperature
8. Flextron control system equipped with a 16 bit microprocessor for machine control and operation and a separate power zone equipped with a static relay.
9. Automatic control of the welding arm height.
10. Possibility of packaging single packages or grouped products.

Technical specifications:
1. Supply voltage: 220 V to 240 V; 1PH-N-PE 50/60Hz.
2. Maximum power: 3100 W.
3. Compressed air pressure: 6 bar.
4. Compressed air consumption 6 Nl/pack.
5. Compressed air connection: Ø 10 mm.
6. Sealing bar: 610 x 480 mm.
7. Maximum product height: 150 mm.
8. Capacity: 600 - 2400 p./h.
9. Maximum dimensions of the foil roll: Ø300 x 600 mm.
10. Belt speed: 10-30 m/min
11. External dimensions of the machine: mm 2090 x 1433 x 1565-1675h.

Tunnel:
1. Single-engine shrink tunnel.
2. Flextron control system equipped with a 16 bit microprocessor for control with a static relay for operating the machine and a separate power zone equipped with contactors.
3. Multilingual control panel with backlit electronic display.
4. Memorizing up to 6 different work cycles.
5. Shrink temperature regulated by microprocessor.
6. Conveyor speed regulated by a microprocessor.
7. Conveyor with silicone-coated rotating/fixed rollers.
8. Control of air flow into the tunnel is varied and regulated by independent deflectors placed at the end of the chamber.

Technical specifications:
1. Supply voltage: 380 V to 415 V; 3PH + PE 50/60 Hz.
2. Maximum power: 8000 W.
3. Chamber entrance dimensions: mm 440 x 250h
4. External dimensions of the machine: mm 1310 X 835 x 1440h.
5. Worktop height: 815 mm.

Personal collection by the Buyer from the headquarters of Utal sp. z o. o.

It is possible to arrange a date to view the machine - to do so, please contact us by e-mail.