Regranulation cascade 110/120 automatic changer

Cascade 110/120 year of production 2011-2015 - Regranulation Cascade 110/120 automatic changer

1. Conveyor belt

• Engine power: 1.5kW
• Belt width: 475mm
• Belt length: 600mm

2. Compactor

• Motor power: 55kw, Chinese, motor protection class IP44.
• Knife rotation speed: 1000 rpm
• Number of moving knives: 9 pieces
• Number of fixed knives: 15 pieces
• Axle material: Cr4V2
• Mixer material: Q235
• Knife material: T10
• Cooling system motor power 1.5kW
• Thermocouple: 1 piece
• There is a degassing valve at the top of the tank that releases the steam that is generated

3. WH100/36 Extruder

• Screw diameter: Ø110mm, Material: 38CrMoAlA.
• Nitrided screw and cylinder - air-cooled.
• Double degassing
• L/D: 36:1
• Engine power: 100kW, A/C 1480rpm
• Electronic parts: RKC thermoregulators, Schneider contactors
• Heating system with 7 zones, power 7 x 6kW, 7 cooling sections, power of each fan 0.37kW, connector 2.5kW.
• Automatic self-cleaning screen exchanger 2x500mm
• Oil pump power: 3.75kW，capacitor: SL-411, low oil level alarm
• Capacity: 250-300kg/h for LDPE
• Vacuum pump, motor power 3kW.


4a. Automatic changer GM 2x500mm, working area 3980cm3, two carbide rotary knives
Total power 25kW, heating 20kW + motor 3kW, hydraulics 1.5kW
Maximum pressure: ≤25-30Mpa

4. Cutting at the head in water mist (American style without bearing)

 Motor power: 1.5kW 2900rpm controlled by ABB inverter
 Head heating power 1.5kW
 Number of knives: 2 pieces made of W18Cr4V material
 Water pump power: 4kW
 Head material 40Cr
 Main elements made of stainless steel


5. Centrifuge

 Engine power: 5.5 kW 1480 rpm
 Main elements made of stainless steel
 Water outlet at the bottom of the tank
 Water pump motor power 4 kW
 Centrifuge dimensions (L×W×H): 1600mm×1200mm×2150mm


6. Fan feeder

 Fan power: 3kW 2800rpm
 Pipe diameter: 100mm
 The tank and transport pipes are made of stainless steel

7. Silo

 Capacity: 1.2 m³
 Material: stainless steel


KL-W/120 extruder
SPECIFICATION:
• Screw diameter: Ø120mm
• Nitrided plasticizing system
• L/D= 23:1
• Double degassing
• Motor power: 55kW TAMEL, inverter controlled
• Cylinder heating system with 5 heating and cooling zones, power 5 x 7kW (average power) ,5
cooling section 0.55kW
• Infeed heating section
• Heated hopper
• Vacuum pump, motor power 4kW (Italian made)
• Thread head on the feed adapted to extruder no. 1
• Stand for screen changer no. 2
• Control cabinet with sections for the extruder, screen changer 2 and cutting system
• 4. Hydraulic plate screen changer
• Filter surface diameter: 300 mm
• Maximum pressure: ≤20Mpa
• sieve change time ≤2 seconds
• Heating power: 20kW