Plastic (HDPE) tanks for rainwater / septic tank / sewage - Aquatechnika

Aquatechnika - the largest selection of rainwater and municipal sewage collection tanks, plastic septic tanks, retention tanks We present a wide range of HardDestinyPoliEtylen (HDPE) plastic tanks. The tanks have various shapes (flat, cylindrical, rectangular), specially reinforced (the possibility of foundation in groundwater), easy to dig (flat tanks mean 60% smaller trench), with a warranty of up to 25 years for the tightness of the tank (tested, have the necessary approvals and marks of conformity). Characteristics of the tanks: BlueLine II - Your benefits: • Tank sizes 1500 - 10,000 liters • No seams, joints or welds - 100% watertight • Low weight, easy installation • Easy backfilling and compacting with sand, gravel or excavated material • Possibility raid by a truck (load class SLW 30) • Possibility of foundation in groundwater up to 1/3 of the tank height • 25-year F-LINE warranty - Advantages: • Easy and quick assembly, low assembly costs, • Small excavation in the ground - limited earthworks allow keep the garden unchanged, • Ideally suited as an additional retention system on existing properties, • Possibility to drive a passenger car, • Possibility of foundation in groundwater up to the height of the reservoir flange, • 25-year warranty. AquaKing http://www.aquatechnika.com.pl/55-zbiorniki-– Advantages: • Monolithic, one piece, no seams or welds • The tank is thick-walled, permanently closed and pressure-resistant • Complete with three DN couplings 100 and with a lockable TopCover without extraction for pedestrian traffic • Low installation depth up to 1 m • Hooks and handles for easy transport • Made of 100% recyclable polyethylene • Made in Germany • 10 year warranty. MONOLITH is an extremely durable tank, designed for the most difficult installation conditions. MONOLITH stands out for its extraordinary stability and resistance to loads. It is distinguished by remarkable stability and resistance to loads, it is unique due to its rectangular structure. It can be easily placed in heavy and cohesive surfaces (e.g. clay) or completely in groundwater. MONOLITH can withstand heavy traffic loads (load class SLW 30). The narrow, rectangular structure makes it particularly easy to assemble, and allows you to minimize the workload of excavation and re-filling. Septic tanks (sealed septic tanks) are made of high-density polyethylene (HDPE) and are intended for the collection of sewage. They are adapted to be covered with a layer of soil not exceeding 1.0 m. In the case of deeper foundation, products with constructionally increased strength are offered. The range of offered capacities covers the range from 2 m3 to 60 m3. Depending on the capacity, the tanks are equipped with one or two inspection hatches with a diameter of 0.6 m. The standard height of the inspection collar is 0.6 m. It is also possible to purchase additional superstructures with standard heights from 0.3m to 0.8m, enabling its extension. The diameter of the inlet pipe is made with a standard DN160 pipe. On request, it is possible to make an inflow connection of any diameter. The design of the tank also allows for an overflow to be connected to another tank in order to increase the capacity. The vent was made with a DN110 pipe.