Boy 55A Injection molding machine

Injection molding machine efficient in operation, connected to the media giving the opportunity to check the operation of all functions, as well as start production to verify the condition of the injection molding machine.

In the years 2010-2018, the injection molding machine was equipped with a three-axis Wittmann W711 ROBOT, so the injection molding machine is 100% configured and prepared to work with a ROBOT

Manufacturer: BOY

Type: BOY 55A
Control: Procan CT
Year of construction: 2002
Opening hours: 50543 hours
Technical data:
Closing force: 350 kN
Column spacing: 360 x 335 mm (h/v)
M16 40/50 thread
Minimum mold mounting height: 250 mm
Maximum distance between plates: 650 mm
Opening distance: 400 mm
Opening force: 38 kN
Closing force: 24.4 kN
Ejector stroke: 80 mm
Ejector force: 20.4 kN
Centering hole diameter Movable plate D: 125 mm
Centering hole diameter Fixed plate D: 125 mm
Depth of nozzle entry into the mold 45 m

Technical data of the injection unit
tilting unit injection (to replace the nozzle and screw)
Injection unit travel: 210 mm
Maximum nozzle pressure 74.2 kN
Screw diameter: 38 mm
Injection capacity: 136.1 cc^
Injection pressure: 1508 bar
Screw length: 16.7L/D
Screw stroke: 120 mm
Screw speed: 10-395 min
Screw torque: 390 N
Injection speed 121.8 g/sec
Number of heating zones: 5
Nozzle path: 230 mm

Dimensions and weight
Machine dimensions LxWxH: 3330 x 1090 x 2040
Gross weight: 2490 kg
General information
Installed heating power: 11/18.7 (400V)
Max hydraulic system pressure: 180 Bar
Oil Tank: 200L

Additional equipment:
1x CEE 16A socket
Schuko socket 10A 2x 230V
Feeding hopper with cover and guide
Rotameters 4x 10L/min
Leveling elements
Euromap 12 Robot Connector
Floppy Drive: 3.5"
Internal Memory YES
Access card YES
output: X232/1
Output: Printers
Air test connection
Light and sound signaling
Technical Documentation
Service Documentation
spare parts (nozzles, heaters, filters)

Additional information:
Procan CT software in English or German is equipped with advanced functions to monitor the injection process as well as to monitor all functions of the injection molding machine equipment
Touch screen + macrolon quick access keypad. The interface has a built-in memory for saving programs without the need to read data from a 3.5" floppy disk. The 3.5" floppy disk drive allows data transfer in both directions.