2 injection molds for the production of garden edging and fixing anchors

I will sell the production of garden edging and fixing anchors for edging and agrotextiles. The edgings are unique on the market due to the length of 1.25 m (all others on the market have a length of 1 m). The edging mold has replaceable inserts that allow the production of two different types of edging with a height of 45mm and 58mm.

Thanks to the use of a non-standard length of the edging, the manufacturer can achieve additional benefits due to more effective production, as we obtain as much as 2.5 meters from one production cycle, and not 2 meters, as in the case of the competition.

The transport of edgings is also more profitable than in the case of competition edgings because we are able to load more running meters on the same transport space than in the case of the standard edging length of 1 m.

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px 'Helvetica Neue'; color: #000000} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px 'Helvetica Neue'; color: #000000; min-height: 12.0px} span.Apple-tab-span {white-space:pre}

Product Specifications:

1. 45mm edging

- Height 4.5 cm

- Width 7.5 cm

- Length 125 cm

- Weight 400g

- 8 anchor pockets

2. Rim 58mm

- Height 5.8 cm

- Width 7.5 cm

- Length 125 cm

- Weight 460g

- 8 anchor pockets

3. Mounting anchor

- Length 20 cm

- Diameter 1.8 cm

- Weight 22g

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px 'Helvetica Neue'; color: #000000} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px 'Helvetica Neue'; color: #000000; min-height: 12.0px} span.Apple-tab-span {white-space:pre}

Mold technical data:

1. Form for garden edging:

- Mold height (between machine plates) 480 mm

- Mold width (between machine columns) 545 mm

- Mold length 1500 mm

- from the mold during one cycle we get 2 pieces of edging, i.e. 2.5 meters

- 8 replaceable mold inserts. (4 inserts for 45mm rim and 4 for 58mm rim)

- cold channel form

2. Mold for mounting anchors:

- Mold height (between machine plates) 210 mm

- Mold width (between machine columns) 345 mm

- Mold length 550 mm

- 8 mounting anchors are obtained from the mold during one cycle

- cold channel form

The molds were produced in 2019, they are in very good condition, ready for production.