Plastoplan Polska Sp. z o.o.
Polyethylene PE, LDPE, HDPE..., Polypropylene PP, Styrene copolymers ABS, SAN, ASA..., Polyamide PA, Polyacetals POM
Poland , 03-901 Warszawa, Al. Księcia Józefa Poniatowskiego 1ABS LG HI121H, granulate, natural
No. 133306
- Type of offer:
- Selling
- Available quantity:
- 16,000 kg
- Material Type:
- ABS
- Material form:
- Pellets
- Material origin:
- Virgin material
- Colour
- Natural / Colourless
- Valid for:
- 7 days
-
- User:
- marzenagajewska
- Company:
- Plastoplan Polska Sp. z o.o.
- Name and surname:
- Marzena Gajewska-Śmiałek
- Contact:
ABS LG HI121H, granulate, natural
available quantity 16 tons
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity 2 | 1/05 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 22 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow (23°C, 3.20 mm, Injection Molded) | 0.40 to 0.70 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness (R-Scale, 23°C, Injection Molded) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength 3 (Yield, 23°C, 3.20 mm, Injection Molded) | 50.0 | MPa | ASTM D638 |
Tensile Elongation 3 (Break, 23°C, 3.20 mm, Injection Molded) | >10 | % | ASTM D638 |
Flexural Modulus 4 (23°C, 6.40 mm, Injection Molded) | 2550 | MPa | ASTM D790 |
Flexural Strength 4 (23°C, 6.40 mm, Injection Molded) | 82.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | ASTM D256 | ||
23°C, 3.20 mm, Injection Molded | 270 | J/m | |
23°C, 6.40 mm, Injection Molded | 220 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load 5 (1.8 MPa, Unannealed, 6.40 mm, Injection Molded) | 85.0 | °C | ASTM D648 |
Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
available quantity 16 tons
Other offers of this company:
Plastech is not responsible for the content of offers. The only owner of it is the user that published it at Plastech..