Richly equipped - a complete line for granulating LDPE plastic waste
- Type of offer::
- Selling
- Price:
- ~6 952 EUR / pc
- Available quantity:
- 1 pc
- Valid for:
- The offer has expired
-
- User:
- moduspack
- Company:
- Modus-Pack Sp. z o.o. w likwidacji
- Name and surname:
- Ryszard Czerniak
- Contact:
A well-equipped, little-used complete line for granulating plastic waste. Year of prod. 2018. Capacity up to 220 kg / h. The line is connected, operational, to be shown at work.
Device description:
1. Single-screw extruder - with double degassing
Snail: 38CrMoA1A, bimetallic
Cylinder: 38CrMoAlA, bimetallic, air-cooled cylinder
Motor power: 55kW AC controlled by an inverter
Screw diameter: Ø85mm;
L / D = 38: 1;
Screws maximum rotation speed: 120rpm
Degassing system: Vacuum pump: 2.2kw 3 * 400V
Heating and cooling zones on the cylinder: 5 pieces
Productivity: 180 - 220 kg / h
2. Compactor
Motor power: 55kW, 3 * 400V
Compactor diameter: 800mm
Number of cutting knives: 3x3
Number of fixed knives: 15 pcs.
Temperature sensor inside the compactor
3. Belt feeder for the compactor
Motor power: 1.5kw 3 * 400V
Belt width: 450mm
4.Metal detector C-SCAN DLS 1040/800/400 version Sensity installed on the conveyor belt feeding the raw material to the compactor - construction made of a board HTL # 15mm laminate
5. Hydraulic plate screen changer
Filter surface diameter: 150 mm
Maximum pressure: ≤35Mpa
Screen change without extruder stop, no leakage, screen change time≤2 seconds
Material: 40 Cr
Heating power: 10KW - 230V (3 zones)
6. Cutting in the water ring
Head material: 40Cr, nitrided
Head heating power: 1.5kw 230V
Motor power: 1.5kw 3 * 400V- inverter controlled
Rotation speed: 2900r / min
Number of cutting knives: 2 pcs,
7. Centrifuge
Productivity: 300 kg / h
Motor power: 4kw 3 * 400V
rotation speed: 1480r / min
Stainless steel water tank approx. 200 liters
Water pump: 3 kW 3 * 400V motor
8. Material transport system
Motor power: 2.2kw 3 * 400V
rotation speed: 2800r / min
Injector and transport pipes for Big-Bag
Big-Bag rack with a cyclone
9. Drive set for unwinding the film
One drive shaft with a diameter of 100 mm
One pressure roller with a diameter of 100 mm, pneumatic pressure
Two side rollers
2.2 kW gear motor
10. Chiler model 25- Refrigerator- for a capacity of 150 kg / h of plastic
Cooling capacity 24kw
Compressor (compressor) power - 8.2 kW (2 compressors, 4 kW each)
The pump capacity obiegowej- 4.3 m 3 / h
1 1/4 "water connections
Cooling fans - 2 pcs x 0.55 kw
Dimensions; length x width x height = 1480 x 935 x1500 mnm
Weight 480 kg
11. Mill for waste / lumps - Single-shaft shredder with clamp Type 2260
Pressure cylinder cylinder stroke (mm) 500
Rotor diameter (mm) 224.7
Rotor length (mm): 600
Rotor speed (r / min) 83
Sieve mesh (mm) 40
Number of rotor knives (pcs) 28 +4
Fixed knives (pcs) 2 +2
Engine power (Kw) 18.5
Hydraulic station with motor (KW) 2,2
Weight (KG) 1400
Leasing at ING bank to be taken over - end of contract 15-12-2023 The takeover consists in transferring the rights of the leasing contract from the existing lessee to the new one.
The principal amount to be repaid is PLN 195 783 + VAT, Monthly installment: PLN 5 800.77 + VAT. Fees: PLN 30,000 + VAT. The new machine cost PLN 415,000 gross.