One of the most common uses of ribbed reinforced AMARGO coffers PP is built by a team of AMARGO across Poland fire protection tanks PE HD, PP for indoor installation, basement, emergency power, buffering, countervailing when there is insufficient pressure in the network and wide area installations (particularly the installation of the risers of a substantial height such as skyscrapers).
In response to current needs and fire regulations (amendments to the applicable rules, improved controls, the restoration of fire risers in apartment houses to working condition) AMARGO offers comprehensive supply of system of water storage tanks used for fire protection. Vessel complies with the function of providing a buffer in water supply fire departments (and hydrants) in the event of fire, ensuring continuous adequate water discharge of a certain pressure.
We offer a complete solution: containers made from the form of rotational molding technology - rotomouldingor made to order - butt-welded, extrusively welded of intermediates such as:

extruded flat panels or molded PE HD, PP-H
PP coffers of ribbed construction of the "Wall Elements MOD Quatro 20"- - wall elements with plastic polypropylene copolymer PP-C.

Dimensions and weight of the coffersallow the introduction of elements of walls, even to the least accessible areas such as basements even with the skyscrapers of 1970's. In place of the foundation tank is set and welded by extruder. Only such a way allows the implementation of the installation of tanks in tight spaces.
 
With the current technological progress in the production of intermediates at the stage of fabrication, and the final implementation - at relatively low prices, the execution of other polyolefin materials and application of corrosion protection is not cost-effective and justifiable from the technical side, and taking into account the lifeservice of plastics parts.
AMARGO tanks in rotomoulding version of PE-HD / PE-LD is the design to enable the execution of a typical door openings (width of 80 cm), to obtain adequate capacity tanks are connected serial-paraller into batteries of the tanks using simple and easy to use fittings (included in AMARGO offer).
AMARGO tanks in the version of "individual design" is a prefabrication at the factory and assembly on site by a professional using extrusion welding, hot mass of binder from the native material. If necessary, the tanks may be additionally reinforced (steel casing, envelope profiles painted, galvanized or coated).
Tanks are made depending on the needs and opportunities, either in the factory of AMARGO ®, or on-site installation - depending on the size and the introduction of the tank to the building / place of destination. Sometimes we have increasingly bigger number of cramped basement installations in existing buildings - where it is not possible to install the tank, then only the coffers, are transported into the premises, and then the elements are connected, bolted and welded extrusively feeding with hot mass of thermoplastic materials.
 
Depending on the Customer's needs and the foundation conditions (extreme temperature, flow rate and fluid temperature, etc.) the tank may be made as insulated with polystyrene and protected.
Additional details and pricing - on request, so please contact us by any means (phone, fax, e-mail).
Detailed information about manufactured and used elements loaders can be found in section structural coffers of ribbed design for the construction of reservoirs, PP